GENERAL CHARACTERISTICS:
Range from ND3/4″ up to ND2″. Full bore.
100% Tightness in both ways. Minimum head loss.
Low torque values.
Guided Gate.
Demountable under pressure. Epoxy paint 250 microns: RAL 5017.
STANDARDS:
Design According To: DIN 3352. Screwed Ends: BSP.
Pressure Test: EN 12266-1 Rate A. Body: 24 bar. Seat: 17,6 bar.
WORKING CONDITIONS (EPDM):
Maximum Working Pressure: 16 bar.
Maximum Working Temperature: – 10 °C / + 90 °C
